JB SYSTEMS Rack case 19", 18U top, 10U front + table

CARATTERISTICHE

Flight case verticale professionale, utilizzabile come work case. Rack standard 19", 18U frontali + 10U nel piano superiore. Lo sportello frontale può diventare un comodo e solido tavolo grazie a specifici supporti. Tavolino scorrevole per lap top o altro. Il computer può rimanere all'interno del case durante il trasporto, grazie ad apposito sistema di fissaggio con velcro e gomma ammortizzante. In entrambi i lati del case sono presenti appositi fori per passaggio cavi. Porta posteriore per apertura/chiusura rapida, con angoli tagliati per consentire passaggio cavi. 2 ruote con freno. Ganci di chiusura solidi a farfall, incassati. Maniglie incassate con molla di ritorno. Colore: nero.

SPECIFICHE

• Extra rack space on top to install 19" mixers, controllers, etc
• Sliding Laptop support
• Keep your equipment wired in the case so you can set up your gear in seconds !
• Equipped with 4 rotating castors of good quality (2 with brake)

The details make the difference

Front cover:

• can be transformed in seconds into a table
• the table can be used on the right side or the left side of the case.
• A cable passage is provided on both sides of the case

Laptop support

• Thanks to its design, the portable computer can stay inside of the case during transport
• The Velcro straps fixed on the tray + the extra foam in the top cover will help to keep your laptop in place during transport
• The rails of the laptop support tray are mounted low enough so they are not disturbing you when you use a 19" mixer or controller in the horizontal rack space.
• If you don’t need this laptop support, you can simply take it off

Rear door

• Faster to open / close as a normal rack cover
• Corner cutout so the door can be closed, even when cables come out of the case.

General : Dimensions (cm)	See drawing
General : Weight (kg)	39
General : Color	black